Euchner CES-AP-CR2-CH-L20-106193, Safety switch, integrated electronics

Euchner CES-AP-CR2-CH-L20-106193, Safety switch with integrated evaluation electronics, P\n: 106193

• Safety switch with integrated evaluation electronics
• No series connection
• Short circuit monitoring
• 2 safety outputs (semiconductor outputs)
• Door hinge right
• Category 4/PL e according to EN ISO 13849-1
• Connection cable PVC, 20 m, flying lead, 6-core
• Multicode
• Two safety screws M4x14 included

Short circuit monitoring The switch generates its own clock signal on the output cables OA/OB. Pay attention to this aspect when connecting to control systems and relays. Multicode evaluation Every suitable actuator is detected by the switch. Category according to EN 13849-1 Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:

• Category 4/PL e according to EN 13849-1

Important: To achieve the stated category in accordance with EN ISO 13849-1, both safety outputs (OA and OB) must be evaluated. LED indicator

• STATE: Status LEDDIA: Diagnostics LED

Additional connection

• OUT: Monitoring output (semiconductor)

Approach directions Typical operating distance (Actuator CES-A-BLN... in conjunction with safety switch CES-AP-C.2-... in case of mounting on plastic) For a side approach direction for the actuator and safety switch, a minimum distance of s = 6 mm must be maintained so that the operating distance of the side lobes is not entered. Attention: The operating distance may vary depending on the background material and installation situation. Terminal assignment

Designation	Function	Conductor coloring of connection cable
UB: Power supply, DC 24 V: BN
FO1A: Safety output, channel 1: WH
0V: Ground, DC 0 V: BU
FO1B: Safety output, channel 2: BK
OUT: Monit