Euchner CET3-AR-CRA-CH-50F-SG-C2290-110905, Sicherheitsschalter, M12, Zuhaltung

Euchner CET3-AR-CRA-CH-50F-SG-C2290-110905, Safety switch with guard locking and integrated evaluation electronics, P\n: 110905

• Safety switch with guard locking and integrated evaluation electronics
• Locking force up to 6500 N
• Up to 20 switches in series
• Short circuit monitoring
• 2 safety outputs (semiconductor outputs)
• Up to category 4/PL e according to EN ISO 13849-1
• With 2 plug connectors M12
• Multicode
• Door monitoring output
• Indication of the door position by LED
• Wire front release (bowden), 3 m, automatic return
• With escape release, 75 mm long
• Approach direction A (default setting on delivery)

Approach direction Horizontal Can be adjusted in 90° steps Safety switchThe device may be operated only in conjunction with the actuator CET-A-.... Important:The actuator must be ordered separately. Multicode evaluation unitEvery suitable actuator is detected by the switch. Solenoid operating voltage

• DC 24 V +10% -15%

Guard locking type

• CET3: Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the guard locking solenoid. The door position is also monitored. The door monitoring output OUT D is set to HIGH as soon as the actuator is above the extended plunger (state: door closed, guard locking not active). The output OUT D remains set also with guard locking active.

LED function display

• LED State: Status LEDLED DIA: Diagnostic LEDLED 1 rd: freely configurableLED 2 gn: illuminates when door is closed

Additional connections

• OUT: Monitoring output (semiconductor)OUT D: Door monitoring outputRST: Reset input

Category according to EN ISO 13849-1Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable