Euchner CET1-AX-LDA-00-50X-SC, Read head with guard locking, P\n: 103444

• Read head with guard locking
• Locking force up to 6500 N
• Up to category 4/PL e according to EN ISO 13849-1
• With 2 plug connectors M8
• 2 LEDs (1 freely configurable)
• With double ramp
• Approach direction A and C (default setting on delivery)

Approach direction Horizontal Can be adjusted in 90° steps Solenoid operating voltage

• DC 24 V +10% -15%

Guard locking type

• CET1: Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the guard locking solenoid.

LED function display

• LED rot: illuminates when solenoid is switched onLED grun: freely configurable

Category according to EN ISO 13849-1 Important: The category in accordance with EN ISO 13849-1 is dependent on the evaluation unit used and on the installation position. Notes

• Special connection cables from EUCHNER are required for the connection. Please take into account in the order!
• The device may be operated only in conjunction with the actuator CET-A-.... The actuator must be ordered separately.

Auxiliary release Is used for releasing the guard locking with the aid of a tool. The auxiliary release must be sealed to prevent tampering (for example with sealing lacquer). Dimension drawing Block diagram Dimension drawingBlock diagram Technical dataApprovals Mechanical values and environment

• Housing material: Safety switch: Die-cast aluminumSlide: Stainless steelWeight: Net: 1 kgAmbient temperature: At UB = 24V DC: -20 ... 55 °CDegree of protection: IP67Mechanical life: 1 x 106Installation orientation: AnyDegree of freedom: X: ±5 mmY: ±5 mmZ: ±4 mmSwitching fre