Sick DAXTAN-0450RA1J0100W01, Linear encoders, DAX, SKU: 1135326

• MTTF D (mean time to dangerous failure): 123years
• Linearity: 0.02% F.S. (Minimum 60m)
• Repeatability: 20m
• Measured values: Positioning
• Measuring range: 0mm... 450mm

Unusable range:

• Nullzone: 50mm
• Damping zone: 63mm

Magnet type:

• Magnet shape: Ring magnet
• Configured for number of magnets: 1piece
• Magnet travel speed: Any
• Measuring frequency (internal): 2ms

Unusable range:

• Nullzone: 50mm
• Damping zone: 63mm

Magnet type:

• Magnet shape: Ring magnet
• Configured for number of magnets: 1piece
• Communication interface: Analog
• Communication Interface detail: Current
• Output signal: 4mA... 20mA

Signals:

• Number of signals: Two output signals (one output signal + an inverted second output signal)
• Sequence of signals: Signal 1: rising, signal 2: falling
• Load resistance: 100... 500

Signals:

• Number of signals: Two output signals (one output signal + an inverted second output signal)
• Sequence of signals: Signal 1: rising, signal 2: falling
• Connection type: Male connector, M12, 8pin
• PIN assignment: 1=Output signal ground (0V PIN ; 2=Output signal ground (0V PIN ; 3=Signal 2; 4=n.c.; 5=Signal 1; 6=Power ground; 7= +24VDC; 8=n.c.
• Male connector coding: Acoded
• Supply voltage 24VDC (20%)
• Current consumption: 50… 100mA
• Reverse polarity protection: Up to − 30VDC
• Residual ripple: 0.28V pp
• Dielectric strength: 500VDC, 0V against housing
• Over voltage protection: 36VDC
• MTTFd: mean time to dangerous failure: 123years
• Mechanical design: DAX Threaded

Thread:

• Thread shape: M18x 1.5
• Thread offset: Without thread offset

Material:

• Pressure pipe: Stainless steel 1.4404(AISI 316L)