Sick DAXLVN-0600BA080000M01, Linear encoders, DAX, SKU: 1133526

• MTTF D (mean time to dangerous failure): 123years
• Linearity: 0.03% F.S. (Minimum 90m)
• Repeatability: 20m
• Measured values: Positioning
• Measuring range: 0mm... 600mm

Unusable range:

• Nullzone: 55mm
• Damping zone: 63mm

Magnet type:

• Magnet shape: Block magnet
• Configured for number of magnets: 1piece
• Magnet travel speed: Any
• Measuring frequency (internal): 2ms

Unusable range:

• Nullzone: 55mm
• Damping zone: 63mm

Magnet type:

• Magnet shape: Block magnet
• Configured for number of magnets: 1piece
• Communication interface: Analog
• Communication Interface detail: Voltage
• Output signal: 0V... 10V

Signals:

• Number of signals: Two output signals (one output signal + an inverted second output signal)
• Sequence of signals: Signal 1: rising, signal 2: falling
• Load resistance: > 10k

Signals:

• Number of signals: Two output signals (one output signal + an inverted second output signal)
• Sequence of signals: Signal 1: rising, signal 2: falling
• Connection type: Male connector, M12, 8pin
• PIN assignment: 1=Output signal ground (0V PIN ; 2=Output signal ground (0V PIN ; 3=Signal 2; 4=n.c.; 5=Signal 1; 6=Power ground; 7= +24VDC; 8=n.c.
• Male connector coding: Acoded
• Supply voltage 24VDC (20%)
• Reverse polarity protection: Up to − 30VDC
• Residual ripple: 0.28V pp
• Dielectric strength: 500VDC, 0V against housing
• Over voltage protection: 36VDC
• MTTFd: mean time to dangerous failure: 123years
• Mechanical design: DAX Low Profile

Material:

• Housing: Aluminum (anodised), zinc, stainless steel, brass
• Mounting bracket: Stainless steel 1.4301

Material:

• Housing: Aluminum (anodised), zinc, stainless steel, brass