S+S REGELTECHNIK 1501-61B2-1001-200 RTM-CO2-SD-U Multifunktionale Raumsensoren

Wartungsfreier Raumsensor AERASGARD RTM - CO2 - SD mit aktivem Ausgang, automatische Kalibrierung (fest), im eleganten Kunststoffgehäuse mit Schnappdeckel, zur Bestimmung des CO2-Gehalts der Luft (0...2000 ppm) und der Temperatur (0...+50°C). Der Messumformer wandelt die Messwerte in ein Normsignal von 0-10 V um.

• Power consumption: < 1.5 W/ 24 V DC typical;
• Data points : temperature, carbon dioxide (CO2)
• Deviation of humidity: typical ± 2 % RH (20…80 % RH ); at + 25 °C, otherwise ± 3 %
• Measuring range, temperature: 0...+ 50 °C (output equivalent to 0 -10 V or 4...20 mA)
• Operating range, temperature: 0...+50 °C
• Temperature deviation: typically ± 0.2 K at +25 °C
• Output, temperature: 0 -10 V (fixed)
• Service life: > 60 months (under normal load conditions)
• Measuring range, CO2: 0...2000 ppm (fixed)
• Sensor, CO2 : optical NDIR sensor
• Output, CO2 : 0 -10 V (fixed)
• Measuring accuracy, CO2: typically ± 30 ppm ± 3 % of measured value
• Temperature dependence, CO2 : ± 5 ppm/ °C or ± 0.5 % of measured value/ °C
• Pressure dependence: ± 0,13 %/ mm Hg
• Gas exchange: by diffusion
• Relay output: without changeover contact
• Warm up time: approx. 1 hour
• Response time: < 2 minutes
• Output : 0 - 10 V
• Output : 0 -10 V (fixed)
• Measuring range: 0...2000 ppm
• Ambient temperature: 0...+50 °C
• Electrical connection: 0.14 - 1.5 mm² via terminal screws
• Housing: plastic, material ABS,
• Dimensions: 98 x 98 x 33 mm (Baldur 2)
• Installation: wall mounting or on in-wall flush box, Ø 55 mm,
• Long-term stability: < 2 % in 15 years
• Protection class : III (according to EN 60 730)
• Protection type: IP 30 (according to EN 60 529)
• Protection type housing: IP 30
• Standards : CE conformity, electromagnetic compatibility