S+S REGELTECHNIK 1101-6286-0210-000 RPTM1-Modbus-T3 Pendel

Kalibrierfähiger Raumpendel-Temperaturmessumformer (mit Hülse) THERMASGARD RPTM 1 - Modbus - T3, mit Modbus-Anschluss, in schlagfester Ausführung Kunststoffgehäuse mit Schnellverschlussschrauben, Kabelsensor mit Edelstahlhülse und Kunststoff-Sinterfilter (austauschbar), wahlweise mit/ohne Display, misst die Temperatur (–50...+150 °C). Das internationale Einheitensystem SI (Standard) kann in imperial geändert werden (über Modbus).

• Voltage supply : 24 V AC (± 20 %) and
• Power consumption: < 1.2 W/ 24 V DC; < 1.8 VA/ 24 V AC
• Measuring range, temperature: –50...+150 °C
• Temperature deviation: typically ± 0.2 K at +25 °C
• Sensor : Pt1000, DIN EN 60751, class B
• Measuring range: –50...+150 °C
• Zero point offset: ± 10 °C
• Ambient temperature: Measuring transducer –30...+70 °C
• Medium : clean air and
• Error detection: sensor breakage, sensor short circuit
• Bus protocol: Modbus (RTU mode),
• Signal filtering : 0,3 s / 1 s / 10 s
• Communication: Modbus RTU (RS485 interface for RTU cable)
• Protective tube: stainless steelV2A (1.4301), Ø = 16 mm, L = 142 mm
• Electrical connection: 0.2 - 1.5 mm², via push-in terminal
• Sensor protection: plastic sinter filter, Ø 16 mm, L = 35 mm, exchangeable
• Cable gland : 2x M 20 x 1.5; with strain relief, replaceable,
• sensor cable: PVC, H03VV-F, 2 x 0.5 mm²,
• Permissible air humidity: < 95 % RH, non-precipitating air
• Protection class : III (according to EN 60 730)
• Protection type: IP 65 (according to EN 60 529)*
• Units: switchable metric / imperial
• Internal diagnostics: Error 1 at sensor breakage
• Cable connection : cable gland, plastic
• Housing: plastic, UV-stabilised,
• Housing dimensions : 108 x 78.5 x 43.3 mm (Tyr 3 without display)
• Standards : CE conformity according to EMC Directive 2014 / 30 /EU