Sick DL1000-S11112, Laser distance sensors, Dx1000, SKU: 1099756

• Measurement principle: HDDM +
• Measuring range: 0.2m... 1,500m, on diamond grade reflective tape
• Target: Reflector
• Resolution: 0.001mm... 100mm, adjustable
• Repeatability: ≥ 1mm, See repeatability characteristic lines
• Measurement accuracy: Typ. 15mm, See measurement accuracy diagram
• Response time: 3ms... 384ms
• Measurement cycle time: 1ms 4ms 16ms
• Output time: 1ms
• Light source: Infrared light (905nm, measuring laser) Visible red light (650nm, Adjustment aid)
• Laser class: 1, even with simultaneous operation of measurement and alignment laser (IEC608251:2014, EN608251:201
• Typ. light spot size (distance): 5mmx 20mm (at 1m) 20mmx 20mm (at 5m) 35mmx 25mm (at 10m) 150mmx 50mm (at 50m) 290mmx 80mm (at 100m) 570mmx 140mm (at 200m) 4,200mmx 920mm (1,500mm)
• Filter: Rain and snow filter Fog filter Moving average distance value Kalman filter Moving average speed value
• Additional function: Selection of relevant distance and signal level range Selection of first or last echo in selected distance and signal level range
• Average laser service life (at 25C): 100,000h 1
• Max. movement speed: 128m/s

Safetyrelated parameters:

• MTTF D : 101years
• DC avg : 0%

Safetyrelated parameters:

• MTTF D : 101years
• DC avg : 0%
• Ethernet: TCP/IP
• Function: Parameterization, output of measurement data
• Data transmission rate: 10/100MBit/s
• Serial: RS422
• Remark: Switchable to SSI

SSI:

• Remark: Switchable to RS422
• Function: Output of measurement data
• PROFINET
• Function: Parameterization, output of measurement data
• Network load class: III

Inputs/outputs:

• In1/Q1: Digital input, digital output (Switchable)
• QA/Q2: Analog output, digital output (Switchable)
• Digital input: Internal pulldown c