Sick DL100-23AB2213, Laser distance sensors, Dx100, SKU: 1096499

• Measuring range: 0.15m... 300m, on diamond grade reflective tape
• Scope: Indoor
• Target: Reflector
• Resolution: 0.1mm, 0.125mm, 1mm, 10mm, 100mm, freely adjustable
• Repeatability: 2mm
• Measurement accuracy: 3mm
• Response time: 2ms
• Measurement cycle time: 1ms
• Output time: 1ms
• Light source: Laser, red
• visible red light
• Type of light: Visible red light
• Laser class: 2, complies with 21CFR 1040.10and 1040.11except for the conformance according to Laser Notice No. 50 from June 24, 2007(IEC608251:2014, EN608251:201
• Typ. light spot size (distance): 5mm + (2mmx distance in m)
• Max. movement speed: 15m/s
• Acceleration (max.): 15m/s

Safetyrelated parameters:

• MTTF D : 101years
• DC avg : 0%

Safetyrelated parameters:

• MTTF D : 101years
• DC avg : 0%
• PROFINET

SSI:

• Digital output:
  • Number: 2
  • Type: Pushpull: PNP/NPN
  • Function: Distance: Distance switching output; Speed; Speed output; Service: Warning message as the sensor ages, if the damping value is exceeded (for example when contaminated, if the permitted interior device temperature is exceeded or undercut, if the measured value has a plausibility error, if the laser is not ready for operation, if the heating is switched on; Laser off; Preset
  • Maximum output current I A : 100mA
  • Multifunctional input (MF): 1xMF1
  • PROFINET

  SSI:

  • Digital output:
    • Number: 2
    • Type: Pushpull: PNP/NPN
    • Function: Distance: Distance switching output; Speed; Speed output; Service: Warning message as the sensor ages, if the damping value is exceeded (for example when contaminated, if the permitted interior device temperature is exceeded or undercut, if the measured value has a plausibility error, if the laser is not ready for operation, if the heating is switch