Schmersal UV10H 432Y Positionsschalter, P/N: 101060554

Metallgehäuse 2 Kontakte 62 mm x 80 mm x 50 mm (Grundgerät) Schaltpunkte und Kontaktart einstellbar 3 Leitungseinführungen M 20 x 1.5 Betätigungsvorsatz nachträglich um 4 x 90º umsetzbar Betätiger stufenlos um 360º einstellbar Betätiger ist um 180º auf Welle umsetzbar Rundstab aus Epoxidharz

Product type description: UV10H 432Y Article number (order number): 101060554 EAN (European Article Number): 4030661046778 eCl@ss number, version 12.0: 27-27-06-01 eCl@ss number, version 11.0: 27-27-06-01 eCl@ss number, version 9.0: 27-27-06-01 ETIM number, version 7.0: EC000030 ETIM number, version 6.0: EC000030 Certificates: cULus Standards: EN IEC 60947-5-1 Working principle: mechanical Housing material: Light alloy die-casting Housing coating material: painted Material of the rod: Epoxy resin Gross weight: 545 g Number of normally closed (NC): 2 B10DNormally-closed contact (NC): 2,000,000 Operations Actuating element: Rod lever Mechanical life, minimum: 10,000,000 Operations Actuating angle, from left of switch axis: 30 ° Actuating angle, from right of switch axis: 30 ° Contact opening: 2 x 1.5 mm Actuating speed, minimum: 1 mm/min Actuating speed, maximum: 3 m/s Note (Actuating speed): Actuating speed with vertical actuating angle to switch axis Termination: Screw terminals M20 x 1.5 Cable section, minimum: 1.5 mm² Cable section, maximum: 2.5 mm² Note: All indications including the conductor ferrules. Wire cross-section: 13 AWG Length of sensor: 50 mm Width of sensor: 62 mm Height of sensor: 280 mm Diameter of the Rod: 6 mm Degree of protection: IP65 Ambient temperature: -20 ... +60 °C Rated insulation voltage Ui: 500 V Thermal test current: 16 A Switching element: Opener (NC) Switching principle: Slow action Material of the contacts, electrical: Silver Note (General): Type of contact and switching points can be factory set to order.