Schmersal TK 441-11Y-T-M20 Medium-duty Positionsschalter, P/N 101167777

Betätiger nachträglich um 4 x 90° umsetzbar Metallgehäuse 2 Kontakte 106 mm x 99 mm x 63 mm (Grundgerät) Schutzart IP65

Product type description: TK 441-11Y-T-M20 Article number (order number): 101167777 EAN (European Article Number): 4030661218991 eCl@ss number, version 12.0: 27-27-06-01 eCl@ss number, version 11.0: 27-27-06-01 eCl@ss number, version 9.0: 27-27-06-01 ETIM number, version 7.0: EC000030 ETIM number, version 6.0: EC000030 Certificates: CCC Standards: EN IEC 60947-5-1 Working principle: mechanical Slide form: Castor Enclosure material: Grey cast iron, galvanised Enclosure coating material: painted Gross weight: 1,340 g Number of normally closed (NC): 1 Number of normally open (NO): 1 B10D Normally-closed contact (NC): 2,000,000 Operations Actuating element: Offset roller lever Roller material: Brass Mechanical life, minimum: 10,000,000 Operations Actuating angle, from left of switch axis: 45 ° Actuating angle, from right of switch axis: 30 ° Contact opening: 2 x 6 mm Actuating speed, minimum: 1 mm/min Actuating speed, maximum: 0.5 m/s Note (Actuating speed): Actuating speed with vertical actuating angle to switch axis Termination: Screw terminals M20 x 1.5 Cable section, minimum: 1.5 mm² Cable section, maximum: 2.5 mm² Note (Cable section): All indications including the conductor ferrules. Wire cross-section: 13 AWG Length of sensor: 63 mm Width of sensor: 106 mm Height of sensor: 173 mm Width of Castor: 6.5 mm Diameter of Castor: 25 mm Degree of protection: IP65 Ambient temperature: -40 ... +200 °C Rated insulation voltage Ui: 400 V Rated impulse withstand voltage Uimp: 6 kV Thermal test current: 16 A Utilisation category AC-15: 400 VAC Utilisation category AC-15: 4 A Switching element: NO contact, NC contact Note (Switching element): with double break Switching principle: Slow action Material of the contacts, electrical: Silver Note (General): Actuation from the right should be avoided, since this reduces the mechanical lif