Schmersal T2S 441-11Y Positionsschalter, P/N: 101058539

2 Leitungseinführungen M 20 x 1.5 mit vergrößertem Nachlauf Metallgehäuse Betätiger mit eingelassener Kugel aus nichtrostendem Stahl 2 Kontakte 106 mm x 99 mm x 63 mm (Grundgerät) Schutzart IP65

Product type description: T2S 441-11Y Article number (order number): 101058539 EAN (European Article Number): 4030661032801 eCl@ss number, version 12.0: 27-27-06-01 eCl@ss number, version 11.0: 27-27-06-01 eCl@ss number, version 9.0: 27-27-06-01 ETIM number, version 7.0: EC000030 ETIM number, version 6.0: EC000030 Certificates: INMETRO, CCC Standards: EN IEC 60947-5-1 Working principle: mechanical Slide form: Sphere Housing material: Grey cast iron, galvanised Housing coating material: painted Gross weight: 1,502 g Number of normally closed (NC): 1 Number of normally open (NO): 1 B10DNormally-closed contact (NC): 2,000,000 Operations Actuating element: Plunger Mechanical life, minimum: 10,000,000 Operations Actuating angle: 20 ° Contact opening: 2 x 6 mm Actuating speed, minimum: 1 mm/min Actuating speed, maximum: 1 m/s Note (Actuating speed): Actuating speed with vertical actuating angle to switch axis Termination: Screw terminals M20 x 1.5 Cable section, minimum: 1.5 mm² Cable section, maximum: 2.5 mm² Note: All indications including the conductor ferrules. Wire cross-section: 13 AWG Length of sensor: 63 mm Width of sensor: 106 mm Height of sensor: 161 mm Diameter of the Plunger: 10 mm Degree of protection: IP65 Ambient temperature: -30 ... +90 °C Rated insulation voltage Ui: 400 V Rated impulse withstand voltage Uimp: 6 kV Thermal test current: 16 A Utilisation category AC-15: 400 VAC Utilisation category AC-15: 4 A Switching element: NO contact, NC contact Note (Switching element): with double break Switching principle: Slow action Material of the contacts, electrical: Silver Note (General): Actuation from the side of the plunger should be avoided, since this reduces the mechanical life of the position switch.