Schmersal T2C 441-11Y Positionsschalter, P/N: 101059661

2 Leitungseinführungen M 20 x 1.5
Metallgehäuse
mit Endlagenrastung
Betätiger nachträglich um 4 x 90° umsetzbar
Änderung der Betätigungsrichtung durch Umsetzen des Betätigers
2 Kontakte
106 mm x 99 mm x 63 mm (Grundgerät)
Betätiger oberflächengehärtet
Schutzart IP65

Product type description: T2C 441-11Y
Article number (order number): 101059661
EAN (European Article Number): 4030661037066
eCl@ss number, version 12.0: 27-27-06-01
eCl@ss number, version 11.0: 27-27-06-01
eCl@ss number, version 9.0: 27-27-06-01
ETIM number, version 7.0: EC000030
ETIM number, version 6.0: EC000030
Certificates: CCC
Standards: EN IEC 60947-5-1
Working principle: mechanical
Enclosure material: Grey cast iron, galvanised
Enclosure coating material: painted
Gross weight: 1,524 g
Number of normally closed (NC): 1
Number of normally open (NO): 1
B10D Normally-closed contact (NC): 2,000,000 Operations
Actuating element: Fork lever
Mechanical life, minimum: 10,000,000 Operations
Contact opening: 2 x 6 mm
Actuating speed, minimum: 1 mm/min
Actuating speed, maximum: 0.5 m/s
Note (Actuating speed): Actuating speed with vertical actuating angle to switch axis
Termination: Screw terminals M20 x 1.5
Cable section, minimum: 1.5 mm²
Cable section, maximum: 2.5 mm²
Note (Cable section): All indications including the conductor ferrules.
Wire cross-section: 13 AWG
Length of sensor: 63 mm
Width of sensor: 106 mm
Height of sensor: 194 mm
Degree of protection: IP65
Ambient temperature: -30 ... +90 °C
Rated insulation voltage Ui: 400 V
Rated impulse withstand voltage Uimp: 6 kV
Thermal test current: 16 A
Utilisation category AC-15: 400 VAC
Utilisation category AC-15: 4 A
Switching element: NO contact, NC contact
Note (Switching element): with double break
Sw