Schmersal MSP 452-11/11Y-M20 Steuerstrom-Spindelschalter, P/N: 101160615

2 Leitungseinführungen
Metallgehäuse
4 Kontakte
118 mm x 174 mm x 64 mm

Product type description: MSP 452-11/11Y-M20
Article number (order number): 101160615
EAN (European Article Number): 4030661190815
eCl@ss number, version 12.0: 27-27-06-01
eCl@ss number, version 11.0: 27-27-06-01
eCl@ss number, version 9.0: 27-27-06-01
ETIM number, version 7.0: EC000030
ETIM number, version 6.0: EC000030
Standards: EN IEC 60947-5-1
Working principle: mechanical
Slide form: Curvature
Enclosure material: Grey cast iron, galvanised
Enclosure coating material: painted
Gross weight: 1,735 g
Number of normally closed (NC): 2
Number of normally open (NO): 2
Actuating element: Plunger
Mechanical life, minimum: 3,000,000 Operations
Contact opening: 2 x 0.5 mm
Actuating torque: 0.2 Nm
Termination: Screw terminals M20 x 1.5
Cable section, minimum: 1.5 mm²
Cable section, maximum: 2.5 mm²
Note (Cable section): All indications including the conductor ferrules.
Wire cross-section: 12 AWG
Length of sensor: 64 mm
Width of sensor: 118 mm
Height of sensor: 174 mm
Diameter of the Plunger: 10 mm
Degree of protection: IP65
Ambient temperature: -30 ... +90 °C
Rated insulation voltage Ui: 250 VAC
Rated impulse withstand voltage Uimp: 4 kV
Thermal test current: 6 A
Utilisation category AC-15: 230 VAC
Utilisation category AC-15: 2.5 A
Switching element: NO contact / NC contact
Switching principle: Snap action
Bounce duration, maximum: 43,221 ms
Switchover time, maximum: 10 ms
Note (General): This rotating spindle limit switch with snap-action insert is only fit for use in normal to average operating conditions, e.g. for machine tools, cranes and conveyors. Protection class IP 65 to IEC/EN 60529., By reversing the contacts, the spindle revolutions can be set between 4 and 55 revolut