Schmersal M. 441-11Y-T-M20 441 belt alignment switch, P/N 101170473

Metallgehäuse
2 Kontakte
106 mm x 99 mm x 63 mm ( Grundgerät)
für schweren Betrieb geeignet

Product type description: M. 441-11Y-T-M20
Article number (order number): 101170473
EAN (European Article Number): 4030661297774
eCl@ss number, version 12.0: 27-27-06-01
eCl@ss number, version 11.0: 27-27-06-01
eCl@ss number, version 9.0: 27-27-06-01
ETIM number, version 7.0: EC000030
ETIM number, version 6.0: EC000030
Certificates: CCC
Standards: EN IEC 60947-5-1
Working principle: mechanical
Enclosure material: Grey cast iron, galvanised
Enclosure coating material: painted
Gross weight: 1,440 g
Number of normally closed (NC): 1
Number of normally open (NO): 1
B10D Normally-closed contact (NC): 2,000,000 Operations
Roller material: Brass
Mechanical life, minimum: 10,000,000 Operations
Contact opening: 2 x 6 mm
Actuation direction: each time 60° right-hand side and left-hand side rotation
Termination: Screw terminals M20 x 1.5
Cable section, minimum: 1.5 mm²
Cable section, maximum: 2.5 mm²
Length of sensor: 63 mm
Width of sensor: 106 mm
Height of sensor: 99 mm
Degree of protection: IP65
Ambient temperature: -40 ... +200 °C
Rated insulation voltage Ui: 250 VAC
Rated impulse withstand voltage Uimp: 4 kV
Thermal test current: 16 A
Utilisation category AC-15: 230 VAC
Utilisation category AC-15: 4 A
Switching element: NO contact, NC contact
Switching principle: Snap action
Switching frequency: 3,000 /h
Material of the contacts, electrical: Silver