Schmersal IFL 5-18-10STP Induktiver Näherungsschalter, P/N: 101099563

Metallgehäuse
DC 3-Leiter
Steckverbinder M12
Bauform M 18 x 1

Product type description: IFL 5-18-10STP
Article number (order number): 101099563
EAN (European Article Number): 4030661008936
eCl@ss number, version 12.0: 27-27-40-01
eCl@ss number, version 11.0: 27-27-01-01
eCl@ss number, version 9.0: 27-27-01-01
ETIM number, version 7.0: EC002714
ETIM number, version 6.0: EC002714
Certificates: CCC
Standards: DIN VDE 0660-208, EN IEC 60947-5-2
Housing construction form: Cylinder, thread
Installation conditions (mechanical): flush
Housing material: Brass
Housing coating material: nickel-plated
Active area: Plastic
Material of the nuts: Brass
Gross weight: 56 g
Integral system diagnostics, status: Yes
Number of cable wires: 3
Tightening torque of nuts, maximum: 18 Nm
Nominal switching distance Sn: 5 mm
Termination: Connector M12
ISO thread of the sensor: M18
width across flats: 24 BK
Length of sensor: 71.4 mm
Degree of protection: IP67
Ambient temperature: -25 ... +70 °C
Protection class: 0
Type of voltage range: DC
No-load supply current I0, typical: 3 mA
Rated operating voltage: 10 ... 30 VDC
Operating current: 200 mA
Switching element: Normally open contact (NO)
Protection circuit integrated: inductive interference protection, Protection against polarity reversal, Surge protection, Max. fuse rating
Switching frequency, approx.: 400 Hz
Voltage drop Ud, maximum: 1.2 V
Current at Voltage drop Ud: 0.2 A
Design of control elements: p-type
Note (Integral System Diagnostics, status ): yellow LED
Note (General): Instead of nuts, a mounting clamp can be provided.