Schmersal IFL 2-12-10P Inductive proximity switch, P/N 101097496

Metallgehäuse
DC 3-Leiter
Bauform M12

Product type description: IFL 2-12-10P
Article number (order number): 101097496
EAN (European Article Number): 4030661017525
eCl@ss number, version 12.0: 27-27-40-01
eCl@ss number, version 11.0: 27-27-01-01
eCl@ss number, version 9.0: 27-27-01-01
ETIM number, version 7.0: EC002714
ETIM number, version 6.0: EC002714
Certificates: CCC
Standards: DIN VDE 0660-208, EN IEC 60947-5-2
Housing construction form: Cylinder, thread
Installation conditions (mechanical): flush
Enclosure material: Brass
Enclosure coating material: nickel-plated
Active area: Plastic
Material of the nuts: Nickel plated brass
Gross weight: 77 g
Integral system diagnostics, status: Yes
Number of cable wires: 3
Tightening torque of nuts, maximum: 15 Nm
Note (Tightening torque of nuts): In the shell core area: max. 500 Ncm
Nominal switching distance Sn: 2 mm
Termination: Cable
Length of cable: 2 m
Wire cross-section: 0.14 mm2
Material of the Cable mantle: PVC
ISO thread of the sensor: M12
width across flats: 17 BK
Length of sensor: 50 mm
Degree of protection: IP67
Ambient temperature: -25 ... +70 °C
Protection class: 0
No-load supply current I0, maximum: 3 mA
Rated operating voltage: 10 ... 30 VDC
Operating current: 200 mA
Switching element: Normally open contact (NO)
Protection circuit integrated: inductive interference protection, Protection against polarity reversal, Surge protection, Max. fuse rating
Switching frequency, approx.: 1,000 Hz
Voltage drop Ud, maximum: 1.2 V
Current at Voltage drop Ud: 0.2 A
Design of control elements: p-type
Note (Integral System Diagnostics, status ): yellow LED