Schmersal IFL 15-30M-10P Induktiver Näherungsschalter, P/N: 101127038

Metallgehäuse DC 3-Leiter Miniatur Bauform Bauform M30

Product type description: IFL 15-30M-10P Article number (order number): 101127038 EAN (European Article Number): 4030661050812 eCl@ss number, version 12.0: 27-27-40-01 eCl@ss number, version 11.0: 27-27-01-01 eCl@ss number, version 9.0: 27-27-01-01 ETIM number, version 7.0: EC002714 ETIM number, version 6.0: EC002714 Standards: DIN VDE 0660-208, EN IEC 60947-5-2 Housing construction form: Cylinder, thread Installation conditions (mechanical): not flush Enclosure material: Brass Enclosure coating material: nickel-plated Active area: Plastic Material of the nuts: Brass Gross weight: 152 g Integral system diagnostics, status: Yes Number of cable wires: 3 Tightening torque of nuts, maximum: 30 Nm Nominal switching distance Sn: 15 mm Termination: Cable Length of cable: 2 m Wire cross-section: 0.34 mm2 Material of the Cable mantle: PVC ISO thread of the sensor: M30 width across flats: 36 BK Length of sensor: 36 mm Degree of protection: IP67 Ambient temperature: -25 ... +70 °C Protection class: 0 No-load supply current I0, maximum: 3.5 mA Rated operating voltage: 10 ... 30 VDC Operating current: 200 mA Switching element: Normally open contact (NO) Protection circuit integrated: inductive interference protection, Protection against polarity reversal, Surge protection, Max. fuse rating Switching frequency, approx.: 100 Hz Voltage drop Ud, maximum: 1.2 V Current at Voltage drop Ud: 0.2 A Design of control elements: p-type Note (Integral System Diagnostics, status ): yellow LED Note (General): Instead of nuts, a mounting clamp can be provided.