Schmersal IFL 15-300-10/01YG Induktiver Näherungsschalter, P/N: 101060599

1 Leitungseinführung PG9 x 1,5 Kunststoffgehäuse AC 2-Leiter schutzisoliert Anschlussraum Bauform M30

Product type description: IFL 15-300-10/01YG Article number (order number): 101060599 EAN (European Article Number): 4030661047829 eCl@ss number, version 12.0: 27-27-40-01 eCl@ss number, version 11.0: 27-27-01-01 eCl@ss number, version 9.0: 27-27-01-01 ETIM number, version 7.0: EC002714 ETIM number, version 6.0: EC002714 Certificates: CCC Standards: DIN VDE 0660-208, EN IEC 60947-5-2 Housing construction form: Cylinder, thread Installation conditions (mechanical): not flush Enclosure material: Plastic Active area: Plastic Material of the nuts: Plastic Material of the washer: Perbunan® Gross weight: 78 g Integral system diagnostics, status: Yes Number of cable wires: 2 Tightening torque of nuts, maximum: 4 Nm Nominal switching distance Sn: 15 mm Termination: Screw connection Cable section, maximum: 1 x 1.5 mm² ISO thread of the sensor: M30 width across flats: 36 BK Length of sensor: 118 mm Degree of protection: IP65 Ambient temperature: -25 ... +70 °C Protection class: II Rated impulse withstand voltage Uimp: 4 kV Rated supply frequency, minimum: 45 Hz Rated supply frequency, maximum: 65 Hz Operating current, minimum: 10 mA Rated operating voltage: 15 ... 250 VAC Operating current: 500 mA Switching element: NO contact or NC contact Protection circuit integrated: inductive interference protection Switching frequency, approx.: 10 Hz Voltage drop Ud, maximum: 4.5 V Current at Voltage drop Ud: 0.2 A Design of control elements: Two-wire Current leakage Ir, maximum: 1 mA Note (Integral System Diagnostics, status ): yellow LED Note (General): Instead of nuts, a mounting clamp can be provided., Programmable by repositioning the plug-in jumper at the terminal screws