Schmersal IFL 15-30-10T Induktiver Näherungsschalter, P/N: 101141544

Metallgehäuse
AC 2-Leiter
schutzisoliert
Bauform M30

Product type description: IFL 15-30-10T Article number (order number): 101141544 EAN (European Article Number): 4030661122441 eCl@ss number, version 12.0: 27-27-40-01 eCl@ss number, version 11.0: 27-27-01-01 eCl@ss number, version 9.0: 27-27-01-01 ETIM number, version 7.0: EC002714 ETIM number, version 6.0: EC002714 Certificates: CCC Standards: DIN VDE 0660-208, EN IEC 60947-5-2 Housing construction form: Cylinder, thread Installation conditions (mechanical): not flush Enclosure material: Brass Enclosure coating material: nickel-plated Active area: Plastic Material of the nuts: Brass Gross weight: 200 g Integral system diagnostics, status: Yes Cable sleeve: Yes Number of cable wires: 2 Tightening torque of nuts, maximum: 30 Nm Nominal switching distance Sn: 15 mm Termination: Cable H03VV-F Length of cable: 2 m Wire cross-section: 0.5 mm2 Material of the Cable mantle: PVC ISO thread of the sensor: M30 width across flats: 36 BK Length of sensor: 100 mm Degree of protection: IP67 Ambient temperature: -25 ... +70 °C Protection class: II Rated impulse withstand voltage Uimp: 4 kV Rated supply frequency, minimum: 45 Hz Rated supply frequency, maximum: 65 Hz Operating current, minimum: 10 mA Rated operating voltage: 15 ... 250 VAC Operating current: 500 mA Switching element: Normally open contact (NO) Protection circuit integrated: inductive interference protection Switching frequency, approx.: 10 Hz Voltage drop Ud, maximum: 4.5 V Current at Voltage drop Ud: 0.2 A Design of control elements: Two-wire Note (Integral System Diagnostics, status ): yellow LED Note (General): Instead of nuts, a mounting clamp can be provided.