Schmersal IFL 15-30-10STP Induktiver Näherungsschalter, P/N: 101108111

Metallgehäuse
DC 3-Leiter
Miniatur Bauform
Steckverbinder M12
Bauform M30

Product type description: IFL 15-30-10STP
Article number (order number): 101108111
EAN (European Article Number): 4030661018706
eCl@ss number, version 12.0: 27-27-40-01
eCl@ss number, version 11.0: 27-27-01-01
eCl@ss number, version 9.0: 27-27-01-01
ETIM number, version 7.0: EC002714
ETIM number, version 6.0: EC002714
Certificates: CCC
Standards: DIN VDE 0660-208, EN IEC 60947-5-2
Housing construction form: Cylinder, thread
Installation conditions (mechanical): not flush
Enclosure material: Brass
Enclosure coating material: nickel-plated
Active area: Plastic
Material of the nuts: Brass
Gross weight: 135 g
Integral system diagnostics, status: Yes
Number of cable wires: 3
Tightening torque of nuts, maximum: 30 Nm
Nominal switching distance Sn: 15 mm
Termination: Cable, Connector M12
Length of cable: 2 m
Wire cross-section: 0.34 mm2
Material of the Cable mantle: PVC
ISO thread of the sensor: M30
width across flats: 36 BK
Length of sensor: 100 mm
Degree of protection: IP67
Ambient temperature: -25 ... +70 °C
Protection class: II
Rated impulse withstand voltage Uimp: 4 kV
Rated supply frequency, minimum: 45 Hz
Rated supply frequency, maximum: 65 Hz
Rated operating voltage: 10 ... 30 VDC
Operating current: 200 mA
Switching element: Normally open contact (NO)
Protection circuit integrated: inductive interference protection, Protection against polarity reversal, Surge protection, Max. fuse rating
Switching frequency, approx.: 10 Hz
Voltage drop Ud, maximum: 1.2 V
Current at Voltage drop Ud: 0.2 A
Design of control elements: p-type
Current leakage Ir, maximum: 1 mA
Note (Integral System Diagnostics, status ): yellow LED
Note (General): Instead of nuts, a m