Schmersal BNS 260-11ZG-ST-L Sicherheits-Sensoren, P/N: 101184383

Steckverbinder M8 x 1, 4-polig
Kunststoffgehäuse
kleine Bauform
verdeckter Einbau möglich
26 mm x 36 mm x 13 mm
hohe Lebensdauer
kein mechanischer Verschleiß
unempfindlich gegen seitlichen Versatz
unempfindlich gegen Verschmutzung

Product type description: BNS 260-11ZG-ST-L
Article number (order number): 101184383
EAN (European Article Number): 4030661321837
eCl@ss number, version 12.0: 27-27-44-01
eCl@ss number, version 11.0: 27-27-24-02
eCl@ss number, version 9.0: 27-27-24-02
ETIM number, version 7.0: EC002544
ETIM number, version 6.0: EC002544
Certificates: cULus
Standards: BG-GS-ET-14, EN IEC 60947-5-3
Coding level according to EN ISO 14119: Low
Working principle: Magnetic drive
Installation conditions (mechanical): quasi-flush
Housing material: Glass-fibre, reinforced thermoplastic
Gross weight: 32 g
Coding: Yes
Integral system diagnostics, general: Yes
Number of normally closed (NC): 1
Number of normally open (NO): 1
Number of safety contacts: 2
Safety classification
Standards: EN ISO 13849-1
Mission time: 20 Year(s)
B10DNormally-closed contact (NC): 25,000,000 Operations
B10D- Value Normally-closed contact/Normally open contact (NC/NO): 25,000,000 Operations
Actuating element: Magnet
Door hinge: Left
Direction of motion: Head-on to the active surface
Note (Switching distance Sn): Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range.
Assured switching distance "ON" Sao: 5 mm
Assured switching distance "OFF" Sar: 15 mm
Termination: Connector M8
Tightening torque of electrical connection: 0.3 Nm
Length of sensor: 13 mm
Width of sens