Schmersal AZ 17-02ZRK-ST Sicherheitsschalter mit getrenntem Betätiger, P/N: 101140775

Steckverbinder M12 x 1, 4-polig 30 mm x 78,5 mm x 30mm Kunststoffgehäuse schutzisoliert hohe Lebensdauer kleine Bauform Universelle Codierung hohe Kontaktsicherheit bei niedrigen Strömen unempfindlich gegen Verschmutzung 8 Betätigungsebenen

Product type description: AZ 17-02ZRK-ST Article number (order number): 101140775 EAN (European Article Number): 4030661119748 eCl@ss number, version 12.0: 27-27-26-02 eCl@ss number, version 11.0: 27-27-26-02 eCl@ss number, version 9.0: 27-27-26-02 ETIM number, version 7.0: EC002592 ETIM number, version 6.0: EC002592 Certificates: BG, cULus, CCC Standards: EN ISO 13849-1, EN ISO 14119, EN IEC 60947-5-1 Coding level according to EN ISO 14119: Low Working principle: electromechanical Enclosure material: Plastic, glass-fibre reinforced thermoplastic, self-extinguishing Gross weight: 85 g Increased latching force: Yes Number of actuating directions: 2 Number of cable glands: 1 Number of safety contacts: 2 Safety classification: 2 Standards: EN ISO 13849-1 Mission time: 20 Year(s) B10D Normally-closed contact (NC): 2,000,000 Operations Mechanical life, minimum: 1,000,000 Operations Latching force: 30 N Positive break travel: 11 mm Positive break force per NC contact, minimum: 17 N Actuating speed, maximum: 2 m/s Mounting: Screws Type of the fixing screws: 2x M5 Termination: Connector plug M12, 4-pole, (A-coding) Length of sensor: 30 mm Width of sensor: 30 mm Height of sensor: 78.5 mm Degree of protection: IP67 Ambient temperature: -30 ... +80 °C Storage and transport temperature, minimum: -30 °C Storage and transport temperature, maximum: +85 °C Permissible installation altitude above sea level, maximum: 2,000 m Rated insulation voltage Ui: 250 VAC Rated impulse withstand voltage Uimp: 4 kV Overvoltage category: III Degree of pollution: 3 Rated impulse withstand voltage, connector 4-pole: 2.5 kV Thermal test current: 10 A Required rated short-circuit current: 1,000 A Switching element: Opener (NC) Switching principle: