Omron K8DT-AS Überwachungsrelais 100 → 240V ac 1-phasig, 1-poliger Wechsler 20mA Überstrom, Unterstrom 2mA

Überwachungsanwendungen = Stromstärke
Elektrische Phasen = 1
Kontaktanordnung = 1-poliger WechslerV ac
Montage Typ = DIN-Schienen
Strom erfasst min. = 2 mA, 10 mA, 20mA
Strom erfasst max. = 20 mA, 100 mA, 500mA
Stromempfindlichkeit = Überstrom, Unterstrom
Verzögerungszeit = 250ms
Frequenzabtastungsbereich = 45 → 65Hz
Serie = K8DT-AS
Betriebstemperaturbereich = +60°C

K8DT-AS Monitoring Motor Protection Relay. • Downsize control panels. • Reduced wiring. • Detects errors in Motors and other equipment via current changes. • Use in either over current or under current mode. • Function as an alarm. • Set threshold values. • Alarm output can be set as a relay or transistor output. • Input signal – Voltage, current, water level electrode and temperature (thermocouple or platinum resistance thermometer) can be input. • Lower power consumption. • Long term contact reliability. • Reliable in poor noise environments. • Slim profile 17.5 mm K8DT-AS1CD 24 VAC/DC Model. • Current Monitoring Relay. • Single phase. • SPDT Contact output. • Power supply 24 V ac/dc. • Setting range 2 to 20 mA ac/dc, 10 to 100 mA ac/dc, 50 to 500 mA ac/dc. • Direct input. • If using other current transformers Do Not exceed the overload capacity. Features and Benefits. • Power supply 100 to 240 V ac, 50/60 Hz, 24 V dc • Manual/ Automatic reset (switchable) • Manual reset – Turn OFF the power supply for minimum of 1 sec. • Start-up lock time 0 to 30 s. • Green LED Power (PWR) • Yellow LED output (OUT) • Red LED Relay output (ALM) • One SPDT contact relay, switchable normally closed (NC) and normally open (NO) using DIP switch. • DIN Rail Mounted • Weight 100 g • Case material PC, UL 94 V-0. • Colour N1.5 • Protection IP20 (terminals) What is a Monitoring / Measuring Relay? A monitoring / measuring relay is a protective control device, various types are available suiting what you wish to monitor. The relays receive inp