Zum Hauptinhalt springen

Microchip WLAN-Modul WEP, WPA, WPA2 SDIO, SPI 3 to 3.6V 22.4 x 14.7 x 2mm

Marke: Microchip

Hersteller Artikel-Nr.: ATWILC3000-MR110CA

Produkt-Nr.: P-CCTRDL

Technische Daten

Abmessungen
22.4 x 14.7 x 2mm
Betriebstemperatur max.
+85 °C
Betriebstemperatur min.
–40 °C
Breite
14.7mm
Höhe
2mm
Länge
22.4mm
Unterstützte Busschnittstellen
SDIO, SPI
Unterstützte Sicherheitsstandards
WEP, WPA, WPA2
Versorgungsspannung
3 to 3.6V

Produktbeschreibung

Unterstützte Sicherheitsstandards = WEP, WPA, WPA2
Unterstützte Busschnittstellen = SDIO, SPI
Versorgungsspannung = 3 to 3.6V
Abmessungen = 22.4 x 14.7 x 2mm
Höhe = 2mm
Länge = 22.4mm
Betriebstemperatur max. = +85 °C
Betriebstemperatur min. = –40 °C
Breite = 14.7mm

ATWILC3000 is a single chip IEEE 802.11 b/g/n RF/Baseband/MAC link controller and Bluetooth 5. The ATWILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with simple SPI/SDIO-to-Wi-Fi and UART-to-Bluetooth interfaces. The ATWILC3000 supports single stream 1x1 802.11n mode providing tested throughput of up to 46 Mbps UDP & 28 Mbps TCP/IP.20MHz (1x1) Wi-Fi plus Bluetooth 5 Low Energy Module Single spatial stream in 2.4GHz ISM band Integrated PA and T/R Switch Superior Sensitivity and Range via advanced PHY signal processing Wi-Fi Direct and Soft-AP support Supports Personal & Enterprise WEP, WPA, WPA2 Security On-chip memory management engine to reduce host load SPI, SDIO, I2C, and UART host interfaces HCI (Host Control Interface) via high speed UART Operating temperature range of -40C to +85C

Produktangebot

11,63 €

13,84 € inkl. MwSt. zzgl. Versandkosten

Lieferzeit ca. 2 TageZustand: Neu

Kennzeichnungen

Artikeltyp
WLAN Module