Leuze Electronic GSX14E/1WT.3-M12 Ultrasonic fork sensor P\n: 50142867

Leuze Electronic GSX14E/1WT.3-M12 Ultrasonic fork sensor P\n: 50142867

Series: 14
Principle of physics: optical and ultrasonics
Application: Detection of non-transparent labels, Detection of transparent labels
Label width, min.: 4 mm ultrasonics / 2 mm optical
Label gap, min.: 2 mm
Medium: Transparent and not transparent
Special version: ALC function (tracking), Manual fine tuning of the switching threshold, Teach input, Warning output, easyTeach function
Light source: LED, LED,Infrared
Wavelength: 850 nm
Transmitted-signal shape: Pulsed
LED group: Exempt group (in acc. with EN 62471)
Protective circuit: Polarity reversal protection, Short circuit protected
Supply voltage UB: 18 ... 30 V, DC
Residual ripple: 0 ... 10 %, From UB
Open-circuit current: 0 ... 80 mA, Typical value
Number of teach inputs: 1 Piece(s)
Type: Teach input
Voltage type: DC
Switching voltage: high: ≥9V, low: ≤ 2 V
Input resistance: 15,000 Ω
Active switching state: High
Number of digital switching outputs: 2 Piece(s)
Type: Digital switching output
Voltage type: DC
Switching current, max.: 100 mA
Switching voltage: high: ≥(UB-2V), low: ≤ 2 V
Load capacity: 0.01 µF
Switching element: Transistor, Push-pull
Switching principle: IO-Link / NPN light switching (switching in the gap), PNP dark switching (switching on the label)
Switching element: Transistor, Push-pull
Switching principle: active low (normal operation high, event case low)
Switching frequency: 2,000 Hz, ultrasonics / 9061 Hz optical
Response time: 0.2 ms, ultrasonics / 0.05 ms optical
Readiness delay: 300 ms
Max. conveyor speed during teach-in: 50 m/min
Type: IO-Link
COM mode: COM3
Profile: Smart sensor profile
Min. cycle time: COM3 = 0.5 ms
Frame type: 2.5
Specification: V1.1
Device ID: 2501
SIO-mode support: Yes
N