Euchner CET1-AX-LDA-00-50F-SA, Read head with guard locking, P\n: 103750

• Read head with guard locking
• Locking force up to 6500 N
• Up to category 4/PL e according to EN ISO 13849-1
• With plug connector M12
• 2 LEDs (1 freely configurable)
• With escape release, 75 mm long
• With double ramp
• Approach direction A and C (default setting on delivery)

Approach direction Horizontal Can be adjusted in 90° steps Solenoid operating voltage

• DC 24 V +10% -15%

Guard locking type

• CET1: Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the guard locking solenoid.

LED function display

• LED rot: illuminates when solenoid is switched onLED grun: freely configurable

Category according to EN ISO 13849-1 Important:The category in accordance with EN ISO 13849-1 is dependent on the evaluation unit used and on the installation position. Notes

• Special connection cables from EUCHNER are required for the connection. Please take into account in the order!
• The device may be operated only in conjunction with the actuator CET-A-.... The actuator must be ordered separately.

Auxiliary release Is used for releasing the guard locking with the aid of a tool. The auxiliary release must be sealed to prevent tampering (for example with sealing lacquer). Escape release This is used for manual release of guard locking from within the danger area without tools. Dimension drawing Block diagram Dimension drawingBlock diagram Technical dataApprovals Mechanical values and environment

• Housing material: Safety switch: Die-cast aluminumSlide: Stainless steelWeight: Net: 1 kgAmbient temperature: At UB = 24V DC: -20 ... 55 °CDegree of protection: IP67Mechanical life: 1 x 106Installation orientation: Any