Sick TMM88D-PCI090S05, Inertial sensors, TMS/TMM88 Dynamic, SKU: 1101884

• Specialty: Node ID 19 Baud rate 500kBit/s Values are stored as default parameters so that they are available again after the sensor is reset
• Standard reference device: TMM88DPCI090, 1094485
• MTTF D (mean time to dangerous failure): 619years ENISO13849
• Number of axis: 2
• Measuring range: 90
• Resolution: 0.01
• Static measurement accuracy: 0.3
• Dynamic measurement accuracy: 0.5
• Temperature coefficient (zero point): Typ. 0.01/K
• Limit frequency: 0.1Hz... 25Hz, 8. range (with digital filter)
• Interference suppression time for sensor fusion filter: 100ms... 10,000ms
• Sampling rate: 200Hz

Additional information:

• Pitch(Euler angle): 90 (Pitch); 180 (Roll)
• Pitch(quaternion): Scalar parts w, vector parts x, y, z
• Acceleration: 8g (x, y, zaxis)
• Turning rate: 250/s (x, y, zaxis)

Additional information:

• Pitch(Euler angle): 90 (Pitch); 180 (Roll)
• Pitch(quaternion): Scalar parts w, vector parts x, y, z
• Acceleration: 8g (x, y, zaxis)
• Turning rate: 250/s (x, y, zaxis)
• Communication interface: CANopen
• Device profile: CiA DSP410
• Address setting: 0… 127, default: 19
• Data transmission rate (baud rate): 10kbit/s... 1,000kbit/s, default: 500kbit/s
• Status information: Via status LED
• Bus termination: Via external terminator
• Parameterising data: Zeroset Limit frequency Interference suppression time Sensor fusion Preset value Inverting of counting direction
• Programmable/configurable: Over PGT12Pro
• Initialization time: 120ms
• Connection type: Male connector, Female connector, 1x, 1x, M12, M12, 5pin, 5pin
• Supply voltage 8VDC... 36VDC
• Current consumption: 15mA @ 24V

Reverse polarity protection:

• Shortcircuit protection of the outputs:
  • Dimensions: 66mmx 90mmx