Sick DGS80B-TSLC02048, Incremental encoders, DGS80, SKU: 1118709

• MTTF D (mean time to dangerous failure): 518years ENISO13849
• Pulses per revolution2,048
• Measuring step: 90, electric/pulses per revolution
• Measuring step deviation: 15 electrical
• Duty cycle: 0.5 15%
• Communication interface: Incremental
• Communication Interface detail: HTL/ Push pull
• Number of signal channels: 6channel
• Initialization time: 50ms
• Output frequency: 300kHz
• Load current: 40mA, per channel
• Operating current: 50mA (without load)
• Power consumption: 0.85W
• Connection type: Male connector, M12, 8pin, radial
• Supply voltage 5... 30V
• Reference signal, position: 90, electric, logically gated with A and B

Reverse polarity protection:

• Shortcircuit protection of the outputs:
  • Mechanical design: Through hollow shaft
  • Shaft diameter: 30mm
  • Flange type / stator coupling: 1sided stator coupling with slot available for order as accessory
  • Weight: 650g
  • Shaftmaterial: Aluminum
  • Flange material: ZAMAC die cast
  • Housing material: ZAMAC die cast
  • Shaft sealing ringmaterial: FKM70
  • Start up torque: 6Ncm ( +20C)
  • Operating torque: 5Ncm ( +20C)
  • Permissible shaft loading: 100N (radial) 100N (axial)
  • Operating speed: 3,600min
  • Moment of inertia of the rotor: 408gcm
  • Bearing lifetime: 10^9 revolutions
  • EMC: According to EN6100062 and EN6100063
  • Enclosure rating: IP65 (IEC6052
  • Permissible relative humidity: 98% (Condensation not permitted)
  • Operating temperature range: 25C... +85C
  • Storage temperature range: 25C... +85C, without package
  • Resistance to shocks: 250g, 6ms (EN6006822
  • Resistance to vibration: 10g, 5Hz... 2,000Hz (EN600682
  • EU declaration of conformity
  • UK declaration of conformity
  • ACMA declaration of conformity
  • ChinaRoHS
  • cRUus Certi