ipf Electronic DW363110, Pressure sensor

Initial setting: -1,000 - -500hPa
Response/decay time: 5ms
Number of switching outputs: 2
Type of switching function: Normally closed contact/normally open contact
Type of alarm output: PNP
Type of analog output: 0 - 10V, 0 - 20mA, 4 - 20mA
Type of electrical connection: Connector M12
Type of switching output: PNP
Turn-off delay: 0 - 20ms
Rated switching current: 250mA
Readiness delay: 2,000ms
Turn-on delay: 0 - 20s
Setting procedure: Application software, Parameterization
End setting: -500 - 0hPa
Relative hysteresis: 1%
Short-circuit protection: Yes
No-load current: 60mA
Measuring range pressure: -1 - 0bar
Measurement method: Relative
Number of pins: 4
Relative linearity deviation: 0.25%
Relative repeat accuracy: 0.1%
Switching frequency: 125Hz
Voltage drop: 2V
Temperature drift over entire measuring range: 0.2%
Reverse polarity protection: Yes
Decay time: 5ms
Damping (analog output): 20s
Damping (displayed value): 20s
Operating voltage (DC): 12 - 32V
Output functions: Window function, Switching point, Hysteresis
Display: LED display
Suitable as 2-point control: Yes
Suitable as limiter: Yes
Suitable as monitor: Yes
Peak value memory: Yes.