ifm Electronic UGR500 Ultraschallsensor

Product characteristics

• Housing: threaded type

Electrical data

• Operating voltage [V]: 10...30 DC; ("supply class 2" to cULus)
• Current consumption [mA]: 55
• Protection class: III
• Reverse polarity protection: yes
• Power-on delay time [s]: < 0.3
• Converter frequency [kHz]: 230

Inputs / outputs

• Number of inputs and outputs: Number of digital outputs: 1

Outputs

• Total number of outputs: 1
• Electrical design: PNP
• Number of digital outputs: 1
• Output function: normally open / normally closed; (parameterisable)
• Max. voltage drop switching output DC [V]: 2.2
• Permanent current rating of switching output DC [mA]: 100
• Switching frequency DC [Hz]: 2
• Short-circuit protection: yes
• Overload protection: yes

Detection zone

• Sensing range [mm]: < 1600; (Target: 200 x 200 mm)
• Angle of aperture cylindrical [°]: 15; (±2)

Accuracy / deviations

• Temperature compensation: yes
• Hysteresis [%]: < 2
• Switch point drift [%]: -2...2
• Repeatability: 1 %
• Resolution [mm]: 1
• Notes on the accuracy / deviation: The indicated values are reached after a warm-up time of min. 20 minutes

Software / programming

• Parameter setting options: hysteresis / window; second switch point; Switch-on and switch-off delay; switch-on operations; Teach function; light-on/dark-on mode

Interfaces

• Communication interface: IO-Link
• Transmission type: COM2 (38,4 kBaud)
• IO-Link revision: 1.1
• SDCI standard: IEC 61131-9
• Profiles: Smart Sensor: Device Identification; Multi-channel, two setpoint switching sensor, type 0 Generic Profiled Sensor; Process Data Variable; Device Diagnosis; Teach Channel
• SIO mode: yes
• Required master port type: A
• Min. process