ifm Electronic SM8050 Magnetisch induktiver Durchflusssensor

Product characteristics

• Number of inputs and outputs: Number of analogue outputs: 1
• Measuring range [l/min]: 0.2...100
• Process connection: threaded connection G 1 DN25 flat seal

Application

• Special feature: Gold-plated contacts
• Application: for industrial applications
• Installation: connection to pipe by means of an adapter
• Media: conductive liquids; water; hydrous media
• Note on media: conductivity: ≥ 20 µS/cm
, viscosity: < 70 mm²/s (40 °C)
• Medium temperature [°C]: -10...70
• Pressure rating [bar]: 16
• Pressure rating [MPa]: 1.6
• MAWP (for applications according to CRN) [bar]: 11.2

Electrical data

• Operating voltage [V]: 18...30 DC; (to SELV/PELV)
• Current consumption [mA]: 95; (24 V)
• Protection class: III
• Reverse polarity protection: yes
• Power-on delay time [s]: 5

Inputs / outputs

• Number of inputs and outputs: Number of analogue outputs: 1

Outputs

• Total number of outputs: 1
• Output signal: analogue signal; IO-Link; (configurable)
• Permanent current rating of switching output DC [mA]: 250
• Number of analogue outputs: 1
• Analogue current output [mA]: 4...20
• Max. load [Ω]: 500
• Overload protection: yes

Measuring/setting range

• Measuring range [l/min]: 0.2...100

Accuracy / deviations

Flow monitoring

Response times

Flow monitoring

Interfaces

• Communication interface: IO-Link
• Transmission type: COM2 (38,4 kBaud)
• IO-Link revision: 1.1
• SDCI standard: IEC 61131-9
• Profiles: Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis