ifm Electronic RUP500 Inkrementaler Drehgeber mit Vollwelle und Display

Product characteristics

• Resolution: 1...10000; (parameterisable; Factory setting: 1024) resolution
• Communication interface: IO-Link
• Shaft design: solid shaft
• Shaft diameter [mm]: 6

Application

• Function principle: incremental
• Detection system: magnetic
• Application: encoder; Speed monitor; counter

Electrical data

• Operating voltage [V]: 4.75...30 DC
• Current consumption [mA]: < 350
• Protection class: III
• Reverse polarity protection: yes
• Max. revolution electrical [U/min]: 12000

Outputs

• Electrical design: HTL/TTL
• Switching frequency [kHz]: 1000
• Factory setting: Output function: HTL (50 mA)
• Short-circuit protection: yes
• Phase difference A and B [°]: 90

Measuring/setting range

• Resolution: 1...10000; (parameterisable; Factory setting: 1024) resolution
Speed monitor
• Set point SP: -9994...9999 U/min, -166.6...166.7 Hz
• Reset point rP: -9999...9994 U/min, -166.7...166.6 Hz
Counter
• Preset point: 1...9999

Accuracy / deviations

• Accuracy [°]: 0.1

Software / programming

• Parameter setting options: encoder; Resolution; direction of rotation; HTL; TTL; Speed monitor; Resolution

Interfaces

• Communication interface: IO-Link
• Transmission type: COM2 (38,4 kBaud)
• IO-Link revision: 1.1
• SIO mode: yes
• Min. process cycle time [ms]: 2.3

Operating conditions

• Ambient temperature [°C]: -40...85
• Storage temperature [°C]: -40...85
• Max. relative air humidity [%]: 95; (condensation not permissible)
• Protection: IP 65; (on the housing: IP 67; on the shaft: IP 64)

Tests / approvals

• Shock resistance: , 100 g
• Vibration resistance: , 20 g
• MTTF [years]: 218

Mechan