ifm Electronic OY5110 Messendes Lichtgitter

Product characteristics

• Type of light: infrared light
• Electrical design: PNP/NPN; (parameterisable)
• Protection: IP 65; IP 67

Electrical data

• Operating voltage [V]: 19.2...28.8 DC
• Protection class: III
• Reverse polarity protection: yes
• Max. power-on delay time [ms]: 300
• Type of light: infrared light
• Wave length [nm]: 880
Receiver
• Current consumption [mA]: 100
Transmitter
• Current consumption [mA]: 15

Inputs / outputs

• Number of inputs and outputs: Number of digital outputs: 1

Outputs

• Electrical design: PNP/NPN; (parameterisable)
• Number of digital outputs: 1
• Output function: normally open / normally closed; (parameterisable)
• Max. voltage drop switching output DC [V]: 2
• Max. current load per output [mA]: 100
• Switching frequency DC [Hz]: 12
• Short-circuit protection: yes
• Overload protection: yes

Detection zone

• Number of beams: 165
• Sensing field height [mm]: 1640
• Sensing field width (low light intensity) [m]: 0...2
• Sensing field width (high light intensity) [m]: 1...10
• Distance between beams [mm]: 10

Software / programming

• Parameter setting options: hysteresis / window; second switch point; Switch-on and switch-off delay; switch-on operations; Teach function; light-on/dark-on mode

Interfaces

• Communication interface: IO-Link
• Transmission type: COM2 (38,4 kBaud)
• IO-Link revision: 1.1
• SDCI standard: IEC 61131-9
• Profiles: Smart Sensor: Device Identification; Multi-channel, two setpoint switching sensor, type 0 Generic Profiled Sensor; Process Data Variable; Device Diagnosis; Teach Channel
• SIO mode: yes
• Required master port type: A
• Min. process cycle time [ms]: 10
• IO-Link process data (cycli