ifm Electronic O2D534 Induktiver Ringsensor

Product characteristics

• Type of light: infrared light
• Image resolution [px]: 1280 x 960
• Max. reading rate [Hz]: 40

Electrical data

• Operating voltage [V]: 18...30 DC
• Current consumption [mA]: < 300; (24V DC; with switched outputs: < 400 mA)
• Protection class: III
• Reverse polarity protection: yes
• Type of light: infrared light
• Wave length [nm]: 850
• Image sensor: CMOS image sensor black/white

Inputs / outputs

• Number of inputs and outputs: Number of digital inputs: 1; Number of digital outputs: 1

Inputs

• Trigger: external; 24 V PNP/NPN (IEC 61131-2 Typ 3); TCP/IP; PROFINET; internal
• Number of digital inputs: 1

Outputs

• Electrical design: PNP/NPN; (parameterisable)
• Number of digital outputs: 1; (configurable)
• Max. voltage drop switching output DC [V]: 1
• Max. current load per output [mA]: 100
• Short-circuit protection: yes
• Type of short-circuit protection: pulsed
• Overload protection: yes

Detection zone

• Field of view size [mm]: Operating distance, field of view, ,
, 200, 38 x 29, , , 300, 58 x 43, , , 500, 96 x 72, , , 1000, 192 x 144, , , 1500, 288 x 216, , , 2000, 384 x 288, , , 5000, 960 x 720, ,
• Operating distance [mm]: > 200
• Image resolution [px]: 1280 x 960
• Lens type: Telephoto lens
• Max. reading rate [Hz]: 40

Software / programming

• Parameter setting options: via PC with ifm Vision Assistant

Interfaces

• Communication interface: Ethernet
Ethernet
• Number of Ethernet interfaces: 1
• Transmission standard: 10Base-T; 100Base-TX
• Transmission rate: 10 MBit/s; 100 MBit/s
• Protocol: TCP/IP; PROFINET
• Factory settings: IP address: 192.168.0.69
, subnet mask: 255.255.