ifm Electronic II5917 Induktiver Analogsensor mit IO Link

Product characteristics

• Electrical design: PNP/NPN; (parameterisable)
• Output function: normally open / normally closed; (parameterisable)
• Communication interface: IO-Link
• Housing: threaded type
• Dimensions [mm]: M30 x 1.5 / L = 65

Electrical data

• Operating voltage [V]: 15...30 DC
• Current consumption [mA]: < 30
• Protection class: II
• Reverse polarity protection: yes

Outputs

• Electrical design: PNP/NPN; (parameterisable)
• Output function: normally open / normally closed; (parameterisable)
• Max. voltage drop switching output DC [V]: 2.5
• Permanent current rating of switching output DC [mA]: 100
• Switching frequency DC [Hz]: 300
• Analogue voltage output [V]: 0...10; (linear; gradient: 1,111 V/mm; for frontal approach and for target made of mild steel: 30 x 30 x 1 mm)
• Min. load resistance [Ω]: 2000
• Short-circuit protection: yes
• Overload protection: yes

Detection zone

• Measuring range [mm]: 1...10
• Switch point IO-Link [mm]: 1.88...9.35

Accuracy / deviations

• Correction factor: steel: 1 / stainless steel: 0.8 / brass: 0.5 / aluminium: 0.5 / copper: 0.4
• Hysteresis [% of Sr]: 3...15
• Note on hysteresis: parameterisable
• Linearity error of analogue output [%]: ± 1; (of the final value of the measuring range)
• Repeatability analogue output [%]: ± 1; (of the final value of the measuring range)
• Temperature coefficient [%/K vom MEW]: ±0,15
• Temperature drift: ± 5 %; (of the final value of the measuring range)

Response times

• Response time [ms]: < 10

Interfaces

• Communication interface: IO-Link
• Transmission type: COM2 (38,4 kBaud)
• IO-Link revision: 1.1
• SDCI standard: IEC 61131-9
• Profiles: Smart Sensor: Identification and diagnosis