ifm Electronic IF6123, Induktiver Sensor

Product characteristics

• Electrical design: PNP/NPN; (parameterisable)
• Output function: normally open / normally closed; (parameterisable)
• Communication interface: IO-Link
• Housing: threaded type
• Dimensions [mm]: M12 x 1 / L = 60

Electrical data

• Operating voltage [V]: 10...30 DC
• Current consumption [mA]: < 15
• Protection class: III
• Reverse polarity protection: yes

Outputs

• Electrical design: PNP/NPN; (parameterisable)
• Output function: normally open / normally closed; (parameterisable)
• Max. voltage drop switching output DC [V]: 2.5
• Permanent current rating of switching output DC [mA]: 100
• Switching frequency DC [Hz]: 600
• Short-circuit protection: yes
• Overload protection: yes

Detection zone

• Switch point IO-Link [mm]: 0.7...3.51; (parameterisable)
• Measuring range IO-Link [mm]: 0.375...3.75

Accuracy / deviations

• Correction factor: steel: 1 / stainless steel: 0.8 / brass: 0.5 / aluminium: 0.5 / copper: 0.4
• Hysteresis [% of Sr]: 3...15
• Linearity error IO-Link [%]: ± 2 %; (of the final value of the measuring range)
• Repeatability IO-Link [%]: ± 1 %; (of the final value of the measuring range)
• Temperature coefficient: of the final value of the measuring range
• Temperature coefficient [%/K vom MEW]: ± 0,3

Interfaces

• Communication interface: IO-Link
• Transmission type: COM2 (38,4 kBaud)
• IO-Link revision: 1.1
• SDCI standard: IEC 61131-9 CDV
• Profiles: Smart Sensor: Device Identification; Device Diagnosis; Device Teach Channel; Binary Data Channel; Process Data Variable
• SIO mode: yes
• Required master port type: A
• Min. process cycle time [ms]: 3
• Supported DeviceIDs:
  • Type of operation, DeviceID: default, 791

  Operating con