ifm Electronic AL1901 IO Link Master mit PROFINET Schnittstelle

Application

• Application: I/O modules for use in the control cabinet

Electrical data

• Operating voltage [V]: 20...30 DC; (US ; to SELV/PELV)
• Current consumption [mA]: 300...3900; (US)
• Protection class: III
Sensor supply US
• Max. current load total [A]: 3.6

Inputs / outputs

• Total number of inputs and outputs: 16; (configurable)
• Number of inputs and outputs: Number of digital inputs: 8; Number of digital outputs: 8

Inputs

• Number of digital inputs: 8; (IO-Link Port Class A)
• Switching level high [V]: 11...30
• Switching level low [V]: 0...5
• Digital inputs protected against short circuits: yes

Outputs

• Number of digital outputs: 8; (IO-Link Port Class A)
• Max. current load per output [mA]: 300
• Short-circuit proof: yes

Interfaces

• Communication interface: Ethernet; IO-Link
Ethernet - PROFINET
• Transmission standard: 100Base-TX
• Transmission rate: 100 MBit/s
• Protocol: PROFINET
• Factory settings: IP address: 0.0.0.0
, subnet mask: 0.0.0.0, gateway IP address: 0.0.0.0, MAC address: see type label
• Note on interfaces: IO-Link Integration Edition 2
, CC-C (Conformance Class C) (IRT-Switch), S2 redundancy, Netload Class III, CiR (Configuration in Run), SNMP (Simple Network Management Protocol), MRP (Media Redundancy Protocol), Supported network topologies: line, ring
Ethernet - Internet of Things
• Transmission standard: 10Base-T; 100Base-TX
• Transmission rate: 10 MBit/s; 100 MBit/s
• Protocol: MQTT JSON
• Factory settings: IP address: 169.254.x.x
, subnet mask: 255.255.0.0, gateway IP address: 0.0.0.0, MAC address: see type label
• Note on interfaces: Secure protocol: HTTPS
IO-Link Master
• Transmission ty