Cabur XCONTA809P RTD converter

Temperature converter CABUR mod XCONTA809P CON series, input: PT100 2-wires, output: 3 configurable ranges, 3-way isolation, 2.5kVac

Series: CON
Code: XCONTA809P
Type: CON-TA-809P
HS code: 85043129
INPUT TECHNICAL DATA:
Signal type IN: PT100 2-wires
Input range IN: -50 °C +50 °C/ -50 °C +100 °C/ -50 °C +150 °C / 0 °C +100 °C /0 °C +150 °C/ 0 °C +200 °C / 0 °C +300 °C / 0 °C +400 °C
Input impedance IN: >1 MΩ (2-wire) / >500 kΩ (3-wire)
Parametrization IN: DIP switch
OUTPUT TECHNICAL DATA:
Signal type OUT: analogue
Output range OUT: 0…10 V / 0…20 mA / 4…20 mA
Maximum output signal OUT: 16 V (current output) / 5 mA (voltage output)
Load impedance OUT: 2 KΩ (voltage output) /500 Ω (current output)
Ripple: <20 mV
Status indication: LED
Parametrization OUT: DIP switch
GENERAL TECHNICAL DATA:
Power supply voltage: 24 Vac/dc (18.0…31.2 Vdc / 19.2…26.4 Vac)
Current consumption: 13 mA (24 Vdc) / 22 mA (24 Vac)
Accuracy: 0.3% FSR (23°C)
Linearity error: 0.1% FSR
Temperature coefficient: <150 ppm / K FSR
Transmission frequency: 10 Hz 3dB
Operating temperature range: -25…+60°C
Insulation: 2.5 kVac / 60 s
Insulation type: 3-way (IN / OUT / power)
Overvoltage category / pollution degree: II / 2
Protection degree: IP 20
Connection terminal IN / OUT: 2.5 mm² / 2.5 mm² (push-in)
Housing material: UL94V-0 plastic material
Dimensions (LxHxD): 17.5x93x73 mm
Approximate weight: 30 g
Mounting information: on a rail, side by side
ACCESSORIES:
Mounting rail (IEC60715/TH35-7.5): PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB
APPROVALS AND MARKINGS: