Cabur XCEPD1, Electronic overcurrent protection

Electronic overcurrent protection, programmable 1...10A 24Vdc

Code: XCEPD1
Type: CEP-D1 –
HS code: 85361010
INPUT TECHNICAL DATA:
Input rated voltage: 24 Vdc
Input voltage range: 18…32 Vdc
Input current: 10 A DC max
OUTPUT TECHNICAL DATA:
Output voltage range: 24 Vdc (voltage drop < 170 mV at Un / In)
Continuous current: 1…10 A DC programmable in 1 A increments
Max system current: 40 A DC with CEP-RCC distribution bar
Default trip curves: slow, medium and fast
Max connectable output capacity: 10,000 μF
Protection: electronic, against reverse polarity
Remote On-OFF control: external 24 Vdc pulse
Status indication: Green LED: constant = OK, flashing = Iout at 90% of nominal, red LED: constant = output manually switched off, flashing slowly = overcurrent, flashing quickly = error
Alarm contact: open collector transistor (overcurrent status)
GENERAL TECHNICAL DATA:
Operating temperature range: –25…+60°C (derating -2 A >40°C)
Input / output isolation: 3 KVac / 60 s (SELV output)
Standard / approvals: EN60950-1
EMC Standard: EN61131-1, EN61131-2, EN60898, EN60947-4-1, EN50081
Overvoltage category / pollution degree: II / 2
Protection degree: IP 20
Connection terminal: 2.5 mm² / 2.5 mm²
Housing material: UL94V-0 plastic material
Dimensions (LxHxD): 8x115x116 mm
Approximate weight: 120 g
Mounting information: vertical on a rail, side by side
ACCESSORIES:
Mounting rail (IEC60715/TH35-7.5): PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB
Marking tag: CEP-MTW (code XCEPMTW, table with 50 tags) CEP-SS (code XCEPSS) CEP-RCC (code XCEPRCC) CEP-RCP (code XCEPRCP) CEP-BCR (8 poles red) CEP-BCB (8 poles blue)
APPROVALS AND MARKINGS: