Bosch Rexroth KSM01.2B-061C-35N-M1-HP2-SE-NN-D7-NN-FW, Antrieb, 4300 prm

The KSM01.2B-061C-35N-M1-HP2-SE-NN-D7-NN-FW is a decentralized servo drive. It is part of the KSM product line from Bosch Rexroth. The actuator is a complete package consisting of a servomotor and its associated power unit as well as control electronics. It is also optionally equipped with a holding brake. The brake is rated for a holding torque of 10 Nm, a clamping delay of 25 milliseconds and a release delay of 40 milliseconds. The brake has a moment of inertia of 0.000059 kg m2. The servo drive has a shaft with a keyway. The shaft is also equipped with a shaft seal. The constant output torque of the motor is 6 Nm, and the maximum torque is 25 Nm. The maximum motor current is 14.9 amperes. The thermal time constant of the motor is 18 minutes and its maximum speed is 4300 rpm.
A gyride connector on the motor housing carries all power and communication signals, as well as signals for the holding brake. The frequency inverter has an IP65 enclosure designed for convection cooling. The recommended operating temperature is between 0 and 40 degrees Celsius. The main communication interface of this servo drive is SERCOS. SERCOS is a high-speed network protocol used in industrial automation for communication between motion controllers, drives, and other automation components. SERCOS provides real-time communication with precise synchronization and deterministic data transfer. The decentralized servo drive has a mass of 5.8 kg and an average sound pressure level of less than 75 dB(A). The control voltage range is 30 to 42 volts and the power consumption is 33.5 watts. The power supply power rating is 930 watts and the power loss is 140 watts. The rated input voltage for the power section is 540 to 750 volts DC.

• Linie: 1
• Ausführung: 2
• Kühlsystem: natürliche Konvektion
• Trägheit der Bremse: 0,000059 kg/m2.
• Konstantes Drehmoment: 6 Nm
• Maximales Drehmoment: 25 Nm
• Maximaler Strom: 14,9 A
• Maximale Drehzahl: