ifm Electronic O3D301 3D Kamera

Product characteristics

• Image resolution 3D [px]: 352 x 264
• Angle of aperture 3D [°]: 40 x 30; (nominal value without lens distortion correction)
• Max. reading rate [Hz]: 25

Application

• Application: output of 3D image data

Electrical data

• Operating voltage [V]: 20.4...28.8 DC; (EN 61131-2)
• Current consumption [mA]: < 2400; (peak current pulsed; typical value: 420; maximum value: 1600)
• Power consumption [W]: 10; (typical value)
• Protection class: III
• Image sensor: PMD 3D ToF-Chip
• Internal lighting: yes; (infrared: 850 nm invisible radiation LED)

Inputs / outputs

• Number of inputs and outputs: Number of digital outputs: 2

Inputs

• Trigger: 24 V PNP/NPN (IEC 61131-2 Typ 3)

Outputs

• Total number of outputs: 2
• Number of digital outputs: 2; (configurable)
• Output function: 24 V PNP/NPN; (EN 61131-2)
• Max. current load per output [mA]: 100
• Short-circuit protection: yes
• Type of short-circuit protection: pulsed
• Overload protection: yes

Detection zone

• Operating distance [mm]: 300...10000
• Note on operating distance: object size: 200 x 200 mm
, reflectivity: 18 %
• Image resolution 3D [px]: 352 x 264
• Angle of aperture 3D [°]: 40 x 30; (nominal value without lens distortion correction)
• Max. reading rate [Hz]: 25

Measuring/setting range

• Measuring range [m]: < 30

Software / programming

• Parameter setting options: via PC with ifm Vision Assistant or XML-RPC

Interfaces

• Communication interface: Ethernet
Ethernet
• Number of Ethernet interfaces: 1
• Transmission standard: 10Base-T; 100Base-TX
• Transmission rate: 10; 100
• Protocol: TCP/IP
• Factory settings: IP address: 192.168.0.69
,