SKF 2-reihig Kugellager, Innen-Ø 120 mm / Außen-Ø 215 mm Außen-ø , Breite 42 mm

SKF Self Aligning Ball Bearing, 120 mm ID, 215 mm OD - 1224 KM/C3 Got a shaft thats difficult to align with its housing, or thats liable to bend during operation? This ball bearing from SKF is ideal to use in this situation, as its not affected by the angular misalignment that can be caused by shaft deflection. Because its self-aligning, it generates a minimal amount of friction during operation and remains cool even at high speeds. A bearing such as this one will give you a long service life in applications with a light axial load.• Open end type allows for straightforward relubrication • Tapered bore type enables the transfer of a load evenly while rolling • Inside diameter of 120 mm and outside diameter of 215 mm, which are displaced relative to each other to accommodate combined loads Application information • Rotating machinery, such as stirrers and blenders • Fans and blowers • Intermediate shafts in vehiclesDie SKF selbstausrichtenden Kugellager mit zwei Reihen von Kugeln mit einem Bohrungsdurchmesser von 120 mm und einem Außendurchmesser von 215 mm. Er hat eine gemeinsame gerodelte Laufbahn im Außenring und zwei tiefe, ununterbrochene Laufbahnnuten im Innenring. Die Lager sind unempfindlich gegenüber Winkelversatz der Welle im Verhältnis zum Gehäuse, der durch Wellenausschlag verursacht werden kann. How do I mount a self-aligning bearing with a tapered bore? Konische Bohrung StahllagerScrew up the lock nut to the end of the indicated range. Remove the lock nut, then place the washer by securing the nut back on the sleeve. Bend one of the lock washer tabs into a matching slot on the nut.