Murrelektronik 7000-44841-7920300, M12 Bu. Flansch/M12 Bu. Flansch D-kod. HWM

M12 fem. recept. / M12 fem. recept. D-cod. rear

PUR 1x4xAWG22 shielded rd UL/CSA+drag ch. 3m

• Material short text: MSDBFH-DBFH-T792_3.0
• Cable length: 3.0 m

• Family construction form: M12
• No. of poles: 4
• Coding: D
• Mounting method: inserted, screwed
• Thread: M12 x 1
• Tightening torque: 0.6 Nm
• Width across flats: SW13
• Material contact: Copper alloy
• Coating contact: gold plated
• Degree of protection (EN IEC 60529): IP67

• Family construction form: M12
• No. of poles: 4
• Coding: D
• Mounting method: inserted, screwed
• Thread: M12 x 1
• Tightening torque: 0.6 Nm
• Coating contact: gold plated
• Degree of protection (EN IEC 60529): IP67

• Operating voltage DC max.: 60 V
• Current operating per contact max.: 1.5 A

• Data transmission rate max.: 100 Mbit/s
• Transfer parameters: CAT5, Class D (ISO/IEC 11801:2002), (EN 50173-1)

• duplex: Full duplex

• Family construction form: M12
• Mounting set: M16 x 1.5
• Width across flats: SW19

• Protection NEMA: 6P, 4, 3
• Pollution Degree: 3
• Rated surge voltage: 15 kV
• Material group (IEC 60664-1): I

• Locking material: Brass
• Coating locking: nickel plated

• Operating temperature min.: -30 °C
• Operating temperature max.: 85 °C
• Additional condition temperature range: depending on cable quality

• Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.
• Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.

• Product standard: DIN EN 61076-2-101 (M12)

• UL 50E: yes